This complete VPN beginner’s guide covers everything from choosing a client to disconnecting, answering 10 questions people often have when getting started. Check device limits, data usage, and speed throttling separately: simultaneous connections don’t mean each device gets its own data allowance, and slow speeds don’t necessarily mean your plan is throttled.
1. What traffic goes through the VPN?
It depends on which traffic the client handles and how its rules route it. System-wide VPN mode typically covers more apps, while system proxy mode mainly affects apps that follow the system proxy settings. Even when the client shows as connected, requests set to bypass the proxy won’t go through the remote server. A browser showing a different IP only confirms that the browser’s request went through the proxy; it doesn’t prove other apps use the same route.
A VPN changes your network path; it doesn’t make websites forget which account you’re signed into. Use HTTPS when browsing, and never dismiss a certificate warning just to open a page.
2. Which VPN client should you choose, and do you need to configure a protocol?
Start with the setup guide for your operating system, then choose a compatible client from the download section of the user panel. On Windows, know the difference between system proxy and VPN mode. On iOS, clients that use the system VPN configuration typically trigger an authorization prompt. Approve the configuration only after verifying the app’s source and confirming that you initiated the connection.
Your client must support both the subscription format and the protocol used by the servers. Shadowsocks, VMess, Trojan, VLESS, Hysteria2, and TUIC aren’t interchangeable names. Being able to import a subscription doesn’t mean every server in it will connect. Beginners should stick with the client recommended in the guide and the imported settings. Don’t change ports at random or disable certificate verification to fix a connection problem.
3. How do you import a subscription, and what should you do next?
- Copy the subscription link for your client from the user panel. In the client, open subscription or configuration management, paste the link, then import or update it.
- Make sure the server list appears, then choose a server and connect. If the list is empty, first check that the link is complete, the format is correct, and your current network can reach the subscription service.
- Once connected, use IP check to verify your browser’s exit IP, then test the app you actually want to use. If the test page is set to bypass the proxy, its result won’t change when you connect to a server.
4. Can you connect multiple devices at the same time?
YinsiVPN’s current plan has no limit on the number of simultaneous connections. Each device still needs a compatible client and its own imported configuration; the server selected on your computer won’t automatically be selected on another device. When several devices use the same plan, check the account’s total usage in the panel. “Unlimited devices” doesn’t mean each device gets a separate data allowance.
If only one device can’t connect, check when its subscription was last updated, its current network, and its proxy permissions. If several devices slow down on the same Wi-Fi network, they may be competing for local bandwidth—for example, while one device uploads a backup or downloads an update.
5. How is data usage counted, and should you choose a monthly plan or a data package?
Usage shown in the client can help with troubleshooting, but the panel is the source of truth for data deductions. Counters may cover different traffic and refresh at different times. In addition to video and downloads, file uploads, cloud sync, and background updates routed through the VPN can use data. Don’t estimate usage based only on how long a page was open.
| Billing method | Data allowance | Best for |
|---|---|---|
| Monthly plan | Data resets monthly on the activation date | Regular use with a predictable monthly allowance |
| Data package | Use it until it runs out; it never expires | Occasional or variable use, with unused data saved for later |
To track unexpected data usage, pause sync and downloads on other devices, note the remaining data in the panel, then complete one task on a single device. Compare the balance after the panel refreshes. This makes it easier to identify the source than running several apps at once.
6. Does a slow connection mean your speed is being throttled?
One slow page load isn’t enough to conclude that your speed is being throttled. Compare the same destination on the same device and network, at roughly the same time. If regular websites are also slow when disconnected, check your local network first. If only one site is slow while connected, check the site’s status and try another server. If similar bottlenecks persist across all servers, review your plan details and remaining data, then give support the time, server name, and steps to reproduce the issue.
Page loads are affected mainly by latency and the size of the resources. Large downloads depend more on sustained throughput, while calls are also sensitive to packet loss and latency spikes. A server that responds quickly in the list can still have choppy audio during a call.
7. How do direct, relayed, and IEPL routes differ?
In a server list, a direct route usually means your device connects to the remote server without an additional relay entry arranged by the service. A relayed route connects to an entry point first, then the service forwards traffic to the exit server. IEPL is an international Ethernet private line. It may carry part of the route between entry and exit, while the connection from your device to the entry point and from the exit server to the destination website may still use the public internet. This differs from “direct” in routing rules, which means a request bypasses the proxy.
Choose based on what you actually need to do. For meetings, test audio and screen sharing; for file transfers, check whether the speed stays consistent. Change only the server when comparing routes so you can tell what caused the difference. See available regions and route types on the servers page.
8. What’s the difference between split tunneling and global mode?
Split tunneling uses rules to decide which requests go through the proxy and which connect directly. Global mode typically routes requests handled by the client through the selected exit server, but it doesn’t guarantee that every app on your system is covered. Split tunneling can keep local websites, office networks, and printers accessible as usual. If an app fails in rule-based mode but works in global mode, check whether the rules miss a domain used for sign-in, files, or media. There’s usually no need to keep global mode on.
Apps may reuse existing connections. After changing rules, close and reopen the app you’re testing, then repeat the same action. This helps avoid mistaking an old connection’s behavior for the result of the new rules.
9. Connected but can’t open websites—is it a DNS leak?
Not necessarily. DNS translates domain names into addresses; a timeout during lookup can prevent a page from loading. A DNS leak means a query expected to go through the tunnel was sent over another route. If routing rules intentionally use local DNS for some domains, seeing a local resolver doesn’t automatically mean there’s a leak. Before drawing a conclusion, confirm the expected route, then check the client’s DNS settings, system settings, and whether your browser uses its own secure DNS.
If no sites load after you join a hotel network, follow its prompts to get online, then reconnect. If regular websites work but one site doesn’t, check whether the issue is a DNS error, a proxy rule that didn’t match, or an access restriction from the site. Don’t disable several security settings at once to troubleshoot one issue.
10. Should you leave your VPN on all the time?
There’s no one-size-fits-all answer. If you use remote work tools for long periods, you can stay connected once you’ve confirmed the connection is stable, avoiding interruptions when your exit route changes. If you only occasionally use cross-border apps or need to access devices on your local network, connect when needed or use split tunneling. If your device already uses a company-managed VPN, follow your organization’s network requirements to avoid two clients competing for system routes.
- ✅ Before a meeting or large upload, run a short test in the same app and avoid switching servers during the task.
- ✅ After switching Wi-Fi networks or waking from sleep, check that the app you need can still connect—don’t rely on the connection icon alone.
- ❌ A VPN isn’t a phishing protection tool. Even when connected, check website addresses and pay attention to certificate warnings.
Recommended setup for beginners: Import your subscription into a compatible client and start in rule-based mode. Test the app you need first, then choose a plan based on your usage. When troubleshooting, change one thing at a time to identify whether the issue comes from your local network, rules, or server.